`
yexin218
  • 浏览: 956272 次
  • 性别: Icon_minigender_1
  • 来自: 珠海
社区版块
存档分类
最新评论

VMware+Windgb+Win7内核驱动调试

阅读更多

本文主要记录个人安装VMware+Windgb+Win7内核驱动调试的笔记。

一、安装环境

  1. 主机:Windows Vista Bussiness
  2. 虚拟机:VMware 7
  3. GUestOS: Win7
  4. Windbg: 6.11

二、虚拟机配置

  1. 打开相应 vmware 虚拟机上的 “Virtaul Machine Settings“

     
  2. “Hardware ”选项中 ----> 点击“Add" 添加一个串口设备 SeriallPort .

     
  3.  "Next",在 "Serial Port" 里选中 “Output to named pipe"

     
  4. "next",然后如下设置:


     
  5. 确定之后,回到如下界面,在右脚"Virtual Machine Settings" 页面时,在“I/O Mode” 里选中“Yield CPU on poll“

  6.  Ok之后就设定完毕了。

三、Windbg设置

      下载地址: Windbg

       安装之后,设置一个桌面快捷方式,然后,右键->属性,在Target中的引号后面添加如下:-b -k com:pipe,port=\\.\pipe\com_1,resets=0

            或者是: -b -k com:port=\\.\pipe\com_1,baud=115200,pipe 【二者似乎皆可】

四、GuestOS设置

         Vista和XP不同, 没有boot.ini文件, 需要用bcdedit进行启动设置。

  1. 在administrator权限下, 进入command line模式,  键入bcdedit命令, 会出现以下界面:



     
  2. 然后, 设置端口COM1, baudrate为115200 (除COM1外, 也可以用1394或USB. 1394用起来比COM口快多了, 当然前提是你需要有1394卡及其驱动. 很恶心的是Vista不再支持1394的文件传输协议, 但是用windbg双机调试还是可以的)
    命令为:
    bcdedit /dbgsettings {serial [baudrate:value][debugport:value] | 1394 [channel:value] | usb }

     
  3. 接着, 我们需要复制一个开机选项, 以进入OS的debug模式
    命令为:
    bcdedit /copy {current} /d DebugEnty
    DebugPoint为选项名称, 名字可以自己定义. 然后复制得到的ID号.

     
  4. 接着增加一个新的选项到引导菜单
    bcdedit /displayorder {current} {ID}
    这里的{ID}的ID值是刚生成的ID值.

     
  5. 激活DEBUG : bcdedit /debug {ID} ON
    这里的{ID} 的ID值还是刚才的ID值.

     
  6. 命令执行成功后, 重新启动机器.或者更简单的图形界面设置:在msconfig界面中,选Boot,再选Advanced options,在选择Debug、Debug port、Baud rate都打上钩。如果所示:

     
  7. 选择DebugEntry[debug]作为等入口。启动后,打开windbg.可以看到类似如下的信息:
    Microsoft (R) Windows Debugger Version 6.11.0001.404 X86
    Copyright (c) Microsoft Corporation. All rights reserved.
    
    Opened \\.\pipe\com_1
    Waiting to reconnect...
    Connected to Windows 7 7600 x86 compatible target at (Thu Dec 10 17:46:36.928 2009 (GMT+8)), ptr64 FALSE
    Kernel Debugger connection established.  (Initial Breakpoint requested)
    Symbol search path is: *** Invalid ***
    ****************************************************************************
    * Symbol loading may be unreliable without a symbol search path.           *
    * Use .symfix to have the debugger choose a symbol path.                   *
    * After setting your symbol path, use .reload to refresh symbol locations. *
    ****************************************************************************
    Executable search path is: 
    *********************************************************************
    * Symbols can not be loaded because symbol path is not initialized. *
    *                                                                   *
    * The Symbol Path can be set by:                                    *
    *   using the _NT_SYMBOL_PATH environment variable.                 *
    *   using the -y <symbol_path> argument when starting the debugger. *
    *   using .sympath and .sympath+                                    *
    *********************************************************************
    *** ERROR: Symbol file could not be found.  Defaulted to export symbols for ntkrpamp.exe - 
    Windows 7 Kernel Version 7600 MP (1 procs) Free x86 compatible
    Product: WinNt, suite: TerminalServer SingleUserTS
    Built by: 7600.16385.x86fre.win7_rtm.090713-1255
    Machine Name:
    Kernel base = 0x83e0f000 PsLoadedModuleList = 0x83f57810
    Debug session time: Thu Dec 10 17:46:32.658 2009 (GMT+8)
    System Uptime: 0 days 0:06:18.429
    Break instruction exception - code 80000003 (first chance)
    *******************************************************************************
    *                                                                             *
    *   You are seeing this message because you pressed either                    *
    *       CTRL+C (if you run kd.exe) or,                                        *
    *       CTRL+BREAK (if you run WinDBG),                                       *
    *   on your debugger machine's keyboard.                                      *
    *                                                                             *
    *                   THIS IS NOT A BUG OR A SYSTEM CRASH                       *
    *                                                                             *
    * If you did not intend to break into the debugger, press the "g" key, then   *
    * press the "Enter" key now.  This message might immediately reappear.  If it *
    * does, press "g" and "Enter" again.                                          *
    *                                                                             *
    *******************************************************************************
    nt!DbgBreakPointWithStatus+0x4:
    83e7a394 cc              int     3
    
     

 

五、操作方式提示

  1. 我发现,如果在GuestOs -win7启动过程中,如果打开了windbg之后,整个系统就像死机,不动了。估计是windbg启动后设定了断点做调试,试试按F5,或者go这样就可以恢复原来的状态。
  • 大小: 23.7 KB
  • 大小: 30.6 KB
  • 大小: 21.4 KB
  • 大小: 49.8 KB
  • 大小: 25.5 KB
  • 大小: 31.6 KB
  • 大小: 9.8 KB
  • 大小: 8 KB
  • 大小: 9.6 KB
  • 大小: 8.1 KB
  • 大小: 9.4 KB
  • 大小: 36.1 KB
分享到:
评论
2 楼 ypyf3000 2013-08-25  
你最后说,系统启动后自动中断,是因为你运行windbg的时候用了 -b选项
1 楼 sinamile 2012-11-01  
很好的文章啊,我按照步骤一步一步来就成功了,8过提醒一下同学在新建串口的时候要看清楚了你的是Serial Port 1还是Serial Port 2一定要是Serial Port 1哦,Serial Port 2会连不上虚拟机的,因为后面的步骤都是按照Serial Port 1来的。因为新建虚拟机是可能会有Printer打印机这个东东会占一个串口,删掉它我们再新建就行了。

相关推荐

Global site tag (gtag.js) - Google Analytics